CHRISTMAS 2004 APPLIQUE (4X4) INSTRUCTIONS

Please note that Buzz Tools change the names of the colors to be used to differentiate
between the different stages when you applique.

Just make sure you adhere to the attached color chart when you stitch out the applique
designs.

All the designs are digitized so that the applique design will be trimmed in the hoop.

1.  Hoop material to be appliqued and attached stabilizer.

2.  An outline will be stitched to indicate the position of the applique pattern.

3.  Remove hoop from machine, and without taking material out of hoop attach material
    to be used for applique.

4.  To create a different look, two layers of 130 gsm batting were placed underneath the
    material.  The material must be pulled thight and pinned to the hooped material.

5.  An outline will now be stitched to indicate the trim line amongst which the material
    must be trimmed.

6.  Remove hoop again from machine and trim material against trim line.

7.  Attach hoop to machine.

8.  The trimmed material will now be tacked down.

9.  The applique design will now be stithed.

Each stage will be indicated on your machine in a different color.

You can also visit our instructions page at www.designsbypetro.com where we have uploaded
photos to help you.